Low Flow Rate Fine Fog Nozzles/ Flat Spray CBIMV series w/ Spray control adaptor

Thread standard - Pipe conn. size M5 depth 4 Standard pressure -
Spray angle 45°, 80°, or 110°* Spray capacity 0.25–14.3 ℓ/hr Supply air type Compressed air
Liquid feeding system Liquid pressure Mean droplet diameter 20–100 μm** Air consumption 2.6–25 ℓ/min, Normal
Air pressure 0.2–0.4 MPa Free passage diameter 0.2–0.4 mm (nozzle orifice)


• New lineup of CBIM series compact nozzles with spray-control adaptor, which can regulate spray ON/OFF with a built-in piston.
• Flat spray pneumatic nozzle producing fine atomization with a mean droplet diameter of 100 μm or less.**
• Features large turn-down ratio under liquid pressures of 0.1–0.3 MPa.
• Produces two different spray distributions: uniform spray distribution throughout spray pattern area (when spraying at a low air-water ratio), or a mountain-shaped distribution having gradually tapered edges (at a high air-water ratio).
• Spray angle of 110゚, 80゚, or 45゚.*

*Spray angle measured at compressed air pressure of 0.3 MPa and liquid pressure of 0.1 MPa.
**Mean droplet diameter measured by laser Doppler method.


Spraying: oil, surface treatment agent, rust preventive.
Moisture control: Paper, gas, ceramics, concrete, etc.
Cleaning: Printed circuit boards, glass tubes, etc.

Industries in which this nozzle is used

• Electronics
• Paper & pulp
• Printing
• Food

Product specifications

Structure • A pneumatic nozzle comprising several parts that include nozzle tip, core, cap, adaptor, etc.
• Internal mixing type designed to mix compressed air and liquid inside the nozzle (Inner air type: compressed air flows in the center of the nozzle, while liquid flows along its circumference).
• Liquid pressure type.

[Adaptor type: CSP]
• Spray ON/OFF can be regulated by switching the pilot air ON/OFF.
(Pilot air pressure must be 0.2 MPa or higher.)

[Adaptor type: CSN]
• Spray ON/OFF can be regulated by turning compressed air ON/OFF.
(Air pressure must be 0.2 MPa or higher to start the spray.)
Material Stainless steel 303
(Packing: FKM)

125 g

Outer dimensions

No. Components
Nozzle tip
Spring cap

Appearance and dimensions may differ depending on nozzle codes and materials. Please contact us for details.

Related products


People who viewed this Item also viewed the Items below.