Ultra-Compact Size, Low Flow Rate Fine Fog Nozzles/ Flat Spray SCBIMV series nozzles

Thread standard Pipe conn. size M3 depth 2.5 (Air inlet/pilot air), M3 depth 3 (Liquid inlet) Standard pressure -
Spray angle 110°, 80°, or 45°* Spray capacity 0.25–4.0 ℓ/hr Supply air type Compressed air
Liquid feeding system Liquid pressure Mean droplet diameter 20–100 μm** Air consumption 2.6–12.4 ℓ/min, Normal
Air pressure 0.2–0.4 MPa Free passage diameter 0.1–0.3 mm (Nozzle orifice)


• Flat spray pneumatic nozzle producing fine atomization with a mean droplet diameter of 100 μm or less.**
• Ultra-compact size. About 42 mm in total length including control adaptor.
• Features large turn-down ratio under liquid pressures of 0.1–0.3 MPa.
• Produces two different spray distributions: uniform spray distribution throughout spray pattern area (when spraying at a low air-water ratio), or a mountain-shaped distribution having gradually tapered edges (at a high air-water ratio).
• Spray angle of 110゚, 80゚, or 45゚.*
• Capable of spraying smallest flow rate among all of our pneumatic spray nozzles.
• Spray ON/OFF can be regulated by switching the pilot air ON/OFF (adaptor type SP) or by turning compressed air ON/OFF (adaptor type SN).

*Spray angle measured at compressed air pressure of 0.3 MPa and liquid pressure of 0.1 MPa.
**Mean droplet diameter measured by Laser Doppler Method.


Spraying: Mold release agent, lubricant, deodorant (trash pit, refuse collector, inlet conduit), oil, surface treatment agent, rust preventive, honey, insecticide, aqueous urea, etc.
Cooling: Dies, gas, glass, steel plates, steel pieces, moldings, automobile bodies, plastic products, etc.
Moisture control: Paper, gas, ceramics, concrete, etc.
Cleaning: Printed circuit boards, glass tubes, etc.
Others: Dust suppression, catalyst denitration, etc.

Industries in which this nozzle is used

• Steelmaking
• Electronics
• Paper & pulp
• Printing
• Food
• Automotives

Product specifications

Structure • Comprising seven parts: Nozzle tip, core, cap, connector, adaptor, packing, and spring cap.
• Connecting adaptor (spray ON/OFF control adaptors) are available from the type SP or SN.
• Internal mixing type designed to mix compressed air and liquid inside the nozzle (Inner air type: compressed air flows in the center of the nozzle, while liquid flows along its circumference).
• Liquid pressure type.
Material • Stainless steel 303 (Packing: FKM)

30 g

Outer dimensions

No. Components
Nozzle tip
Spring cap


*1) Hole φ1 is for air relief.
*2) No pilot air for SN-type adaptor.

• Appearance and dimensions may differ depending on nozzle codes and materials. Please contact us for details.

People who viewed this Item also viewed the Items below.