[Discontinued] Large Capacity Impinging-type Fine Fog Nozzles/ Full Cone Spray AKIJet®-S series nozzles
| Thread standard | - | Pipe conn. size | Air inlet: Rc3/8–Rc3/4, Liquid inlet: Rc1/4–Rc3/8 | Standard pressure | - |
|---|---|---|---|---|---|
| Spray angle | - | Spray capacity | 50–1,600 ℓ/hr (*1) | Supply air type | Compressed air |
| Liquid feeding system | Liquid pressure | Mean droplet diameter | - | Air consumption | 1,430–5,800 ℓ/min, Normal (*2) |
| Air pressure | - | Free passage diameter | 2.0–4.3 mm (*3) | ||
Features
• Full cone pneumatic spray nozzle producing a large amount of fine and semi-fine atomization.
• Atomized droplets are impinged against each other creating ultrasonic waves, which results in creation of a uniform distribution of even finer droplet sizes.
*1) Measured at compressed air pressure of 0.3–0.4 MPa and liquid pressure of 0.02–0.2 MPa.
*2) Measured at compressed air pressure of 0.3–0.4 MPa.
*3) Free passage diameter of liquid inlet.
Applications
• Cooling: Gas, steel plates, refractories, moldings, glass, etc.
• Moisture control: Flue gas, concrete
• Combustion: Oil, waste water
• Others: Mixing two liquids, Spray drying
Industries in which this nozzle is used
• Steelmaking
• Pollution Control
• Paper & Pulp
• Printing
• Automotives
Product specifications
| Structure | • Comprising several parts: Nozzle body, adaptor, strainer, etc. • First, compressed air and liquid are mixed outside the nozzle for atomizing (External mixing type). Then air-stream entraining fine fog jets out from the nozzle and impinges against another air-stream of the same nature for shattering the fog into even finer, more-uniform droplets. • Liquid pressure type. |
||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Main material: Stainless steel 316 (For details, see the component list below the drawing) |
||||||||||||||||||||||||||||||||||||||||||||
| Mass |
|
||||||||||||||||||||||||||||||||||||||||||||
| Outer dimensions |
AKI150S S316+HS316 (metal-to-metal seal)
AKI370S S316+HS316 (metal-to-metal seal)
In our material code, "S" represents "stainless steel". (Example) S316 represents stainless steel 316.
Dimensions and Pipe connection sizes
*It may be slightly changed depending on how firmly the plug is tightened. |
||||||||||||||||||||||||||||||||||||||||||||
| Related products |
|
||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||
