Low Flow Rate Fine Fog Nozzles/ Full Cone Spray BIMJ series nozzles

Thread standard - Pipe conn. size - Standard pressure -
Spray angle 20° or 70° (*1) Spray capacity 1.3–107 ℓ/hr Supply air type Compressed air
Liquid feeding system Liquid pressure Mean droplet diameter 20–100 μm Air consumption 7–245 ℓ/min, Normal
Air pressure 0.2–0.4 MPa Free passage diameter 0.4–3.1 mm (*2)


• Full cone spray pneumatic nozzle producing fine atomization with a mean droplet diameter of 100 μm or less (*3).
• Features large turn-down ratio under liquid pressures of 0.1–0.3 MPa.
• Spray angle of 20゚ or 70゚.

*1) Spray angle measured at compressed air pressure of 0.3 MPa and liquid pressure of 0.1 MPa.
*2) Free passage diameter of nozzle orifice.
*3) Measured by Laser Doppler Method.


Spraying: Mold release agent, lubricant, deodorant (trash pit, refuse collector, inlet conduit), oil, surface treatment agent, rust preventive, honey, insecticide, aqueous urea, etc.
Cooling: Dies, gas, glass, steel plates, steel pieces, moldings, automobile bodies, plastic products, etc.
Moisture control: Paper, gas, ceramics, concrete, etc.
[Steelmaking industry]
Raw material process: Dust suppression at the conveyor line, Flue gas denitration reducing agent
Steelmaking process: Cooling refractories at maintenance of ladle and tundish, Cooling electric furnace and electrode
Rolling mill process: Cooling coil
Surface finish process: Minimized spangle treatment at the continuous galvazing line, Cooling coating line

Industries in which this nozzle is used

• Steelmaking
• Pollution control
• Electronics
• Paper & pulp
• Printing
• Food
• Automotives

Product specifications

Structure • Comprising four parts: Nozzle tip, core, cap, and adaptor.
• Connecting adaptors are available from eight types (N, T, NDB, SPB, SNB, and ball joint type of UNDB, USPB, USNB) including the ones which can regulate spray ON/OFF and adjust spray direction. Please see our catalog for details.
• Internal mixing type designed to mix compressed air and liquid inside the nozzle (Inner air type: compressed air flows in the center of the nozzle, while liquid flows along its circumference).
• Liquid pressure type.
Material • Stainless steel 303
[Optional material] Stainless steel 316L
Type of adaptor Air consumption code Pipe connection size Mass (g)
Compressed air Liquid Pilot air
N 02, 04, 075 Rc1/8 Rc1/8 - 55
15, 22 Rc1/4 Rc1/4 130
T 02, 04, 075 Rc1/8 Rc1/8 - 80
15, 22 Rc1/4 Rc1/4 210
NDB (UNDB) 02, 04, 075 Rc1/8 Rc1/8 - 172
15, 22 193
SPB (USPB) 02, 04, 075 Rc1/8 Rc1/8 Rc1/8 146
15, 22 167
SNB (USNB) 02, 04, 075 Rc1/8 Rc1/8 - 151
15, 22 172

・Details of adaptors are shown on the catalog.

Related products

[Mounting bracket]

• Mounting bracket enables easy fixing of BIM nozzle on a pole with desired spray direction.
• Please indicate "with φ8 mounting bracket" or "with φ10 mounting bracket" at the end of nozzle description when you order.
• This photo shows a BIM nozzle with mounting bracket installed on a pole.


Bagaimana cara memesan

Punya pertanyaan? Kami tidak menyediakan item katalog. Kami dapat menyediakan produk yang dibuat khusus untuk memenuhi kebutuhan Anda.

Silakan tanyakan atau pesan nozzle tertentu menggunakan sistem pengkodean kami.
Sistem pengkodean dijelaskan dalam katalog kami yang dapat diunduh dengan mengklik tombol "Katalog" di bawah ini.
Anda juga dapat menghubungi kami untuk informasi lebih lanjut untuk menemukan produk yang sesuai.