PT. IKEUCHI INDONESIA

  • Hubungi Kami

Compact Design Low Flow Rate Fine Fog Nozzles/ Flat Spray CBIMV-S series nozzles

Thread standard - Pipe conn. size See catalog Standard pressure -
Spray angle 80° (*1) Spray capacity 0.1–5.5 L/hr Supply air type Compressed air
Liquid feeding system Liquid siphon Mean droplet diameter 20–30 μm Air consumption 3.75–92 L/min, Normal
Air pressure 0.2–0.4 MPa Free passage diameter 0.2–0.7 mm (*2)

Features

• Compact version of BIM series producing fine atomization. Space-saving design.
• Able to provide the lowest spray flow rate among all of our pneumatic spray nozzles.
• Clog-resistant design with a low parts count.
• Some CBIMV-S models are available with a spray control adaptor, which can regulate spray ON/OFF with a built-in piston.
(See the PERFORMANCE DATA in the catalog below about the availability of adaptor for each model number.)
• CBIMV-S series are flat spray pneumatic nozzles producing fine atomization with a mean droplet diameter of 30 μm or less (*3).
• Liquid siphon feed type (liquid pressure device is not required).
• Even spray distribution across the entire spray area.
• Spray angle of 80゚.

*1) Spray angle measured at a compressed air pressure of 0.3 MPa and liquid siphon height of 100 mm.
*2) Free passage diameter of the nozzle orifice.
*3) Measured by Laser Doppler Method.

Applications

Spraying: Mold release agent, lubricant, deodorant (trash pit, refuse collector, inlet conduit), oil, surface treatment agent, rust preventive, honey, insecticide, aqueous urea, etc.
Cooling: Dies, gas, glass, steel plates, steel pieces, moldings, automobile bodies, plastic products, etc.
Moisture control: Paper, gas, ceramics, concrete, etc.
Cleaning: Printed circuit boards, glass tubes, etc.
Others: Dust suppression, catalyst denitration, etc.

Industries in which this nozzle is used

• Steelmaking
• Pollution control
• Electronics
• Paper & pulp
• Printing
• Food
• Automotives

Product specifications

Structure • Comprising four parts: Nozzle tip, core, cap, and adaptor.
• Internal mixing type designed to mix compressed air and liquid inside the nozzle (Inner air type: compressed air flows in the center of the nozzle, while liquid flows along its circumference).
• Liquid siphon feed type.
Material Stainless steel 303
Mass

About 22 g

Outer dimensions

①Tip
②Core
③Cap
④Adaptor

Dimensions and Pipe connection sizes

Air consumption code Outer dimensions (mm) Pipe conn. size
L1 L2 L3 L4 H Compressed air Liquid Fixing
005 27.7 19.2 8 2.5 13 M5 depth 3 M5 depth 3 M3×2
01 27.7 19.2
02 28 19.5
04 31.3 22.8
075 32.6 24.1

• Appearance and dimensions may differ depending on nozzle codes and materials. Please contact us for details.

Bagaimana cara memesan

Punya pertanyaan? Kami tidak menyediakan item katalog. Kami dapat menyediakan produk yang dibuat khusus untuk memenuhi kebutuhan Anda.

Silakan tanyakan atau pesan nozzle tertentu menggunakan sistem pengkodean kami.
Sistem pengkodean dijelaskan dalam katalog kami yang dapat diunduh dengan mengklik tombol "Katalog" di bawah ini.
Anda juga dapat menghubungi kami untuk informasi lebih lanjut untuk menemukan produk yang sesuai.