share
| Thread standard | - | Pipe conn. size | - | Standard pressure | - |
|---|---|---|---|---|---|
| Spray angle | 80° (*1) | Spray capacity | 0.5–5.5 ℓ/hr | Supply air type | Compressed air |
| Liquid feeding system | Liquid siphon | Mean droplet diameter | 20–30 μm | Air consumption | 15–92 ℓ/min, Normal |
| Air pressure | 0.2–0.4 MPa | Free passage diameter | 0.3–0.7 mm (*2) | ||
• Flat spray pneumatic nozzle producing fine atomization with a mean droplet diameter of 30μm or less (*3).
• Liquid siphon feed type (liquid pressure device is not required).
• Even spray distribution across the entire spray area.
• Spray angle of 80ﾟ.
*1) Spray angle measured at compressed air pressure of 0.3 MPa and liquid siphon height of 100 mm.
*2) Free passage diameter of nozzle orifice.
*3) Measured by Laser Doppler Method.
Spraying: Mold release agent, lubricant, deodorant (trash pit, refuse collector, inlet conduit), oil, surface treatment agent, rust preventive, honey, insecticide, aqueous urea, etc.
Cooling: Dies, gas, glass, steel plates, steel pieces, moldings, automobile bodies, plastic products, etc.
Moisture control: Paper, gas, ceramics, concrete, etc.
Cleaning: Printed circuit boards, glass tubes, etc.
Others: Dust suppression, catalyst denitration, etc.
• Steelmaking
• Pollution control
• Electronics
• Paper & pulp
• Printing
• Food
• Automotives
| Structure | • Comprising four parts: Nozzle tip, core, cap, and adaptor. • Connecting adaptors are available from eight types (N, T, NDB, SPB, SNB, and ball joint type of UNDB, USPB, USNB) including the ones which can regulate spray ON/OFF and adjust spray direction. Please see our catalog for details. • Internal mixing type designed to mix compressed air and liquid inside the nozzle (Inner air type: compressed air flows in the center of the nozzle, while liquid flows along its circumference). • Liquid siphon feed type. |
|||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | • Stainless steel 303 [Optional material] Stainless steel 316L |
|||||||||||||||||||||||||||||||||||||||
| Mass |
・Details of adaptors are shown on the catalog.
|
|||||||||||||||||||||||||||||||||||||||
| Related products |
|
|||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||
• Mounting bracket enables easy fixing of BIM nozzle on a pole with desired spray direction.
• Please indicate "with φ8 mounting bracket" or "with φ10 mounting bracket" at the end of nozzle description when you order.
• This photo shows a BIM nozzle with mounting bracket installed on a pole.
Silakan tanyakan atau pesan nozzle tertentu menggunakan sistem pengkodean kami.
Sistem pengkodean dijelaskan dalam katalog kami yang dapat diunduh dengan mengklik tombol "Katalog" di bawah ini.
Anda juga dapat menghubungi kami untuk informasi lebih lanjut untuk menemukan produk yang sesuai.
