PT. IKEUCHI INDONESIA

  • Hubungi Kami

Ejector nozzle for solution agitation EJX series nozzles

Pipe conn. size R1/8, R1/4, R3/8, R1/2, R3/4, R1, or R1*1/2 Spray angle - Mean droplet diameter -
Strainer Not included Standard pressure 0.05 MPa Spray capacity 3.1–460 ℓ/min (Reference value)
Air consumption - Free passage diameter 1.5–17.5

Features

• Taking in surrounding liquid, EJX series solution agitation nozzle spouts out 3-4 times more volume than the amount supplied.
• Simple structure and compact design suitable for multiple-nozzle arrangement.

Applications

• Solution agitation, preventing deposition, uniformizing concentration and pH
• Cleaning in liquids
• Submerged etching
• Plating

Industries in which this nozzle is used

• Electronics
• Automotives

Product specifications

Structure • One-piece structure producing 3-4 times more spray volume than the amount supplied.
Material • Stainless steel 304 or PVC for sizes 1M and 1*1/2M
• Stainless steel 303 or PP-IN for sizes 1/8M and 1/4M
• Stainless steel 303 for other thread sizes
Mass
Body Pipe conn. size Mass(g)
Stainless steel 303 Stainless steel 304 PP PVC
Metal R1/8 11 - - -
R1/4 26 - - -
R3/8 80 - - -
R1/2 170 - - -
R3/4 420 - - -
R1 - 2,200 - -
R1*1/2 - 3,200 - -
Plastic R1/8 - - 1.3 -
R1/4 - - 3.2 -
R3/8 - - 10 -
R1/2 - - 20 -
R3/4 - - 48 -
R1 - - - 460
R1*1/2 - - - 540

• Size R1/8 and R1/4 made of PP are injection molded.
• Figures in ( ) after the pipe connection sizes indicate the spray capacity codes.

Outer dimensions

EJA series

Body (material) Pipe conn. size Outer dimensions(mm)
L H φD N
Metal R1/8 30 10 11 7
R1/4 48 14 16 10.5
R3/8 72 22 24 11
R1/2 93 27 31 14
R3/4 126 34 42 15
R1 172 60 76.3 18
R1*1/2 212 80 89.1 20
Body (material) Pipe conn. size Outer dimensions(mm)
L H φD N
Plastic R1/8 30 11 11 7
R1/4 48 16 16 10.5
R3/8 72 22 24 11
R1/2 93 27 31 14
R3/4 126 34 42 15
R1 172 60 80 18
R1*1/2 212 80 90 20

[Note]
• Sizes R1/8 and R1/4 made of PP are injection molded.
• Appearance and dimensions may differ slightly depending on materials and nozzle codes. Inquire with us for details.

Related products

Solution agitation EJX series nozzles high flow rate type
• High flow rate EJX series, featuring 1.5-2 times higher spray impact (flow velocity) compared to …

Solenoid-activated Spray Nozzles SETO-SD series nozzles
• Full cone spray pneumatic nozzle producing fine atomization with a mean droplet diameter of 15–25…

Related products

[Two-direction Jet type]

• Two-direction jet EJX series (Spray from two holes at an angle of 45 degrees)
• One-piece structure
• material : PP or Stainless steel 303
• Solution agitation, preventing deposition, uniformizing concentration and pH, submerged etching, plating

[Slit jet type]

• Slit jet type EJX series
• Flat spray pattern produced from 70 mm-wide slit
• Comprises two parts : Nozzle tip and cap (body)
• material : PP or Stainless steel 303
• Applications: Solution agitation, preventing deposition, uniformizing concentration and pH, submerged etching, plating, blowing off water drops on the edge

Bagaimana cara memesan

Punya pertanyaan? Kami tidak menyediakan item katalog. Kami dapat menyediakan produk yang dibuat khusus untuk memenuhi kebutuhan Anda.

Silakan tanyakan atau pesan nozzle tertentu menggunakan sistem pengkodean kami.
Sistem pengkodean dijelaskan dalam katalog kami yang dapat diunduh dengan mengklik tombol "Katalog" di bawah ini.
Anda juga dapat menghubungi kami untuk informasi lebih lanjut untuk menemukan produk yang sesuai.